Dang good tip from Jeff @discusfarm.us!

[Jason]

for the people who purchased the Medo linears from me and had a hard time finding a 3/8" mnpt fitting.

Just remove the plate from the pump, bore out a larger size hole and Tap 1/2" or larger size threads, problem solved!

if you don't have a drill press and tap&die set, just bring the plate to any machine shop, I'm sure they could do it in 5 minutes for a nominal fee.

thanks Jeff!

[Jeff]

NP jason. It takes 5 min and 1/2" is the perfect size.

[SSTurner]

Found mine (3/8 to 1/2 fitting) in "gas line" area at Lowes.
That gives ya the same 1/2 that Jeff has.

Steve

[Jeff]

Dang I looked for close to 2 months and came up empty. Good Job.

[SSTurner]

yep thats about how long it took me ;D

[henryD]

Nah....Go to home depot and you can find the correct size in the plumbing section or the lawn section. It will cost about 5.00 and 3 different parts but it can be done.

[limige]

i used a gal. 3/8 nipple, gal 3/8-1/2" bushing and lastly a 1/2"npt-1"pvc fitting.

but good tip, your right it would be easy.

[RandalB]

John Guest also makes a 3/8" Speed fitting for braided hose.....

RandalB

[Jason]

John Guest also makes a 3/8" Speed fitting for braided hose.....

RandalB


sorry Randal!

forgot that! jg makes great fittings!