View Full Version : stand for 75g tanks
utiliy
08-11-2012, 09:46 PM
got a lead on another 75g tank.
was wondering the best way to build a stand-where there is one on top and one on bottm. any ideas? thx
TNT77
08-11-2012, 11:05 PM
I made this for two 40g breeders.
http://i1123.photobucket.com/albums/l555/tbennett77/discus/PICT0010-1.jpg
http://i1123.photobucket.com/albums/l555/tbennett77/discus/PICT00082.jpg
And had these welded for triple 75g tanks.
http://i1123.photobucket.com/albums/l555/tbennett77/Fishroom/PICT0110.jpg
Brokenrack
08-11-2012, 11:23 PM
This is a good option posted by nc0gnet0 in another thread:
http://www.drsfostersmith.com/product/prod_display.cfm?c=3578+3732+9883&pcatid=9883
magewynd
08-11-2012, 11:27 PM
Really nice Tara. You don't have the plans or step by step photos for us males with two left thumbs do you? Probably have to get my daughter to help me anyway.
I made this for two 40g breeders.
http://i1123.photobucket.com/albums/l555/tbennett77/discus/PICT0010-1.jpg
TNT77
08-11-2012, 11:44 PM
Really nice Tara. You don't have the plans or step by step photos for us males with two left thumbs do you? Probably have to get my daughter to help me anyway.
I know the picture isnt the clearest but here is the frame for the stand and I didnt use plans I just built it. I did use metal brackets to steady up the frame probably overkill but made me feel better.
http://i1123.photobucket.com/albums/l555/tbennett77/discus/PICT0022.jpg
magewynd
08-12-2012, 12:16 AM
Thanks Tara. If you make another one please take pics.
utiliy
08-13-2012, 12:42 AM
i like the welded ones...very expensive?
on the wooden ones-u think made out of 2x6's frames would hold a 75g on top? perhaps 2-3 frame supports in the back and 2 at the sides? should i use just 3/4 in plywood-or could i get by with 3/8 or 1/2 inch for the bottoms?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.