Price list for quick cone info. and ordering and a few pictures!

Cone with no lip, plain or terra cotta.....$12
Plain terra cotta cone with lip.....$14
Swirled cone with lip.....$14

Cone completely glazed, takes a lot of glaze, many colors, all tank safe glaze used.....$24
12" cone in terra cotta only, $18
16" Tall cones for xlg discus or Altum angels, terra cotta only, $25

Shipping will be extra, will use FedEx or USPS flat rate box. 1-3 USPS, 4 or more FedEx. Depending on location either one is used regardless of # of cones.

Approx. shipping prices are $10-16 for 1-3 cones to most areas of US and
4-6 cones are usually $14-22 depending on where in US.
I do ship to Canada.

Below are pics of some of the cones. I also make pleco caves, clay discus wall art and clay aquatic plant dishes.

Send me a private message to order or just make an inquiry. All interest is welcomed!
Barb:)

Hi Disgirl
any idea the postal rates to Canada....fedex might charge a brokerage fee so postal would be better....
thanks

Dean, I am sending a box of 8 cones to Alberta, USPS, and it is $45 postage for delivery in a week or so. FedEx is much higher. Thanks for the inquiry,
Barb:)

thanks for getting back to me....sorry I kind of forgot about contacting you...how much to ship just regular 1st class mail....there would be no hurry for these...even if it took 2-3 weeks to get them????? Just curious... and would probably be interested in about 3 or 4 of these....thanks
also, It sounds like most people like the ones with the lips at the bottom...is that correct.....

I'm sending you a private message Dean.
Barb

Nice Barb.. very nice. I will need one for my Solomons soon

Quote:

---

Originally Posted by ashaysathe

Nice Barb.. very nice. I will need one for my Solomons soon

---

Any time Ashay, just let me know when!
Barb:)

could you post a picture of what a pleco cave looks like?

Sure, here are some of them! I will make them to order, you choose the size, with or without a floor. They are all $10 or less plus shipping. Just send me a pm!
Barb

Your cones and caves are awesome Barb x

Thanks Sid! Are there breeding cones available in Scotland for you discus breeders? Or maybe you go the natural route with wood, or rocks or slate?
Barb:)

Quote:

---

Originally Posted by Disgirl

Are there breeding cones available in Scotland

---

Hi Barb, Could you ship to Scotland, I could link up with Sid

in a joint shipment. Regards John...

Sure I can! Just a matter of the shipping cost you would have to provide. I have sent cones to Canada and Trinidad and Australia so far. I can wrap them well for a long trip! Just send me a private message about it if you want.
Barb:)

How tall are the discus cones?

Joey!

They are 9-9 1/2", but I can also make them shorter or taller.
Barb

Thanks Barb!

Joey!

I am new to the site and trying to get a message to Disgirl to purchase some cones. How do I contact her?

More than likely she will respond to your post shortly.

Sent from my PC36100 using Tapatalk

Quote:

---

Originally Posted by birdman1

I am new to the site and trying to get a message to Disgirl to purchase some cones. How do I contact her?

---

Hi Birdman, I will send you a private message, check "notifications" up above. Just click on the word. Thanks,

Barb

How do I order a few cones? I'm new and think I privately messaged but I can't see it in my sent folder so who knows if it worked? lol

Quote:

---

Originally Posted by fscii

How do I order a few cones? I'm new and think I privately messaged but I can't see it in my sent folder so who knows if it worked? lol

---

I received your private message and will email you in the morning. To see a sent message in your folder you will have to click on "save" to keep it.
Barb

Hello Barb,
Just setting up new breeding tank, I just joined this forum. Love your designs. I will not be able to send you a private message until I have 5 posts in the forum. I am interested in purchasing one or two of your cones.

Could you email or send me photos of available cones, I prefer all glazed.

Does anyone know if the discus have any preference regarding laying eggs on glazed vs. non-glazed surfaces?

Good question. In my many years of discus keeping and being on this forum a few years, I have seen eggs put on glass, wood, clay, rocks, plants, plastic tubing, and probably other surfaces. I don't think they care. The cones, clay or glazed are for our benefit in saving as many eggs and fry as possible. And to be a piece of art in the tank. They liven up a bare bottom tank.
Barb

Are these prices current? How much is shipping of two plain cones with no lip and air hole in top to 38834?

Quote:

---

Originally Posted by Disgirl

Cone with no lip, plain or terra cotta.....$12
Plain terra cotta cone with lip.....$14
Swirled cone with lip.....$14

Cone completely glazed, takes a lot of glaze, many colors, all tank safe glaze used.....$24
12" cone in terra cotta only, $18
16" Tall cones for xlg discus or Altum angels, terra cotta only, $25

Shipping will be extra, will use FedEx or USPS flat rate box. 1-3 USPS, 4 or more FedEx. Depending on location either one is used regardless of # of cones.

Approx. shipping prices are $10-16 for 1-3 cones to most areas of US and
4-6 cones are usually $14-22 depending on where in US.
I do ship to Canada.

Below are pics of some of the cones. I also make pleco caves, clay discus wall art and clay aquatic plant dishes.

Send me a private message to order or just make an inquiry. All interest is welcomed!
Barb:)

---

Quote:

---

Originally Posted by OC Discus

Are these prices current? How much is shipping of two plain cones with no lip and air hole in top to 38834?

---

go to this thread.. where she says.. "break is over"..

it was in her sponsor section.. at the top

http://forum.simplydiscus.com/showth...-Break-is-over

Thanks Skip


Sent from my iPhone using Tapatalk

I am in the greensboro Area, are you somewhere around there.. I have a cone but my discus keep knocking it over. want something a little more weight? How much dies one of the 12" weigh?

Thanks

Sorry for the late reply, I have been out of town for a week. My 12" cones are heavy, have never weighed one though. If you have any size cone that gets knocked over, just put a heavy rock (aquarium safe of course) into the bottom of it, glue it with silicone glue if you want, instant heavy cone! Or I can make you a heavy cone.
Barb

Cant see pictures? Just says attached images

Quote:

---

Originally Posted by fishcube

Cant see pictures? Just says attached images

---

Go back to post # 1

how much is it to ship 2 tera cottqa cones to Montana 59425

hi, any idea the postage to Montana 59425 for 2 cones

Hi Jeff, I would use the USPS med. flat rate box which is $13. You can send me a pm or email if you want to place an order. Thanks,
Barb

hello, I so hope you are still doing this, but would like to know how to buy 2 of the swirl cones, please if you will let me know what the total s/h included to 71822,(Arkansas), once again would like to say these look awesome, thanks

Just sent you a pm Mike. Yes, I am definitely still in the cone business. Getting ready to start up a whole new batch this week. If anyone else needs anything of clay, now is the time to let me know. Thanks,
Barb

Hi Barb,
I need to order some swirled cones with lip from you please. I'm in Fayetteville, NC. Please message me. I can't figure out how to message you.

Quote:

---

Originally Posted by Karosreal

Hi Barb,
I can't figure out how to message you.

---

Hi Karen. If you click on Barb's user name 'Disgirl' it will bring up a box with options to private message her or send her an email.

Thank you Joe.