AquaticSuppliers.com     Golden State Discus

Results 1 to 6 of 6

Thread: Leaking Turbo-Twist UV Sterilizer - 3rd time

  1. #1
    Registered Member -gb-'s Avatar
    Join Date
    Nov 2003
    Location
    Toronto, Ontario
    Posts
    455

    Angry Leaking Turbo-Twist UV Sterilizer - 3rd time

    I've been having difficulties with my Turbo-Twist UV Sterilizer (12x - 36 W). Long story short, I'm on my third leaky unit in a year. The first two I used leaked within the first thirty days of setting them up. Now my third Turbo-Twist is also leaking. The first two times the Turbo-Twists leaked Coralife replaced them no charge. After the 2nd replacement I was told if it leaks again I was on my own. Well I noticed it leaking today.

    The Turbo-Twist does not leak on the outer housing. That would actually be preferable. Instead it leaks into the sealed quartz sleeve where the UV bulb is. This sleeve fils up with water and submersed the electrical prongs in water. After the quartz sleeve is completely full it then starts starts leaking on the floor.

    I don't think I'd be exaggerating to say this is an obvious electrical hazard. I'll be calling Coralife on Monday to express my concern.

    Has anyone experienced this same problem?
    - don't eat my fish

  2. #2
    Registered Member Trier20's Avatar
    Join Date
    Feb 2012
    Location
    Prairie du Chien, Wisconsin
    Posts
    2,707
    Real Name
    Brandon Trier

    Default Re: Leaking Turbo-Twist UV Sterilizer - 3rd time

    I've had one for a year and I've onlt had one problem. It was a big on that ended up dumping 100 gallons of water on my floor. The fitting that broke I replaced and haven't had a problem since.
    -Brandon
    Discus.....The best cult I've been a part of!
    B's Bunker

  3. #3
    Registered Member MSD's Avatar
    Join Date
    Dec 2007
    Location
    Long Island, NY
    Posts
    2,139

    Default Re: Leaking Turbo-Twist UV Sterilizer - 3rd time

    I use the in-tank version to avoid this problem.
    Mark

  4. #4
    Registered Member -gb-'s Avatar
    Join Date
    Nov 2003
    Location
    Toronto, Ontario
    Posts
    455

    Default Re: Leaking Turbo-Twist UV Sterilizer - 3rd time

    Hi Mark, a in take version would be great but I only have a 65 gallon and well I need all the room I can get for fish. That and I like the look of having nothing in the tank that isn't absolutely necessary.
    - don't eat my fish

  5. #5
    Registered Member -gb-'s Avatar
    Join Date
    Nov 2003
    Location
    Toronto, Ontario
    Posts
    455

    Default Re: Leaking Turbo-Twist UV Sterilizer - 3rd time

    So instead of calling Coralife for the 4th time I'm going to see i I can fix the Turbo-Twist myself. I picked up some silicone from my LFS and caulked the hell out of this thing. Hopefully this works.

    - don't eat my fish

  6. #6
    Registered Member -gb-'s Avatar
    Join Date
    Nov 2003
    Location
    Toronto, Ontario
    Posts
    455

    Default Re: Leaking Turbo-Twist UV Sterilizer - 3rd time

    Quick update:

    Even after I thought I caulked every possible place my Turbo-Twist could leak it started leaking agin. So, I finally decided to replace it altogether with something more professional. Today I installed an Aqua Ultraviolet UV Classic 8 Watt. I'm happy with it so far. Very sturdy construction and no LEAKS

    http://www.aquaultraviolet.com/produ...lizers/classic
    - don't eat my fish

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Cafepress