Im interested to build the same type of weir overflow box with bean/animal pipework. Any updates and pictures on your system and its functionality?
Hi Everyone, I'm in the process of designing my 1st custom tank and would like some opinions on my design.
Tank:
Rimless Starphire 110 Gallon(71"x18"x20")
External Coast to Coast Box(71"x4"x6")
Bean Animal Overflow with 1" PVC instead of 1.5"
I have not decided how I want the returns to be, I was thinking one on either side and the returns pushing the water down the back. I think I would have them tee'd from the same return pump I just don't know how big of a return pump I would need to accomplish this.
Sump:
29 Gallon
Poret Foam(10ppi, 20ppi, 30ppi)
Ceramic Bio-Rings(1000grams)
2 x Hydro Sponge Filters
2 x 300watt Titanium Heaters from jehmco
ETCI-1R Heater Controller from jehmco
Purigen Reactor(750ml)
Aqua UV 15w UV Sterilizer
Lights:
2x Current USA Satellite Pro LEDS 36"
Stock:
12 Discus
2 Altum Angels
6-8 Sterbai Corys
Front.jpgSide.jpgTop.jpgOverflow.jpg
Anything I am not considering or design flaws?
Suggestions and comments would be appreciated!
Thanks!
Im interested to build the same type of weir overflow box with bean/animal pipework. Any updates and pictures on your system and its functionality?
I have not built the tank yet. Had some financial issues come up and plans have been put on hold temporarily. Hopefully I can start building in the next 2-3 months.
Just an FYI, you know you will have a 1" water line around the tank right?
Your water level in the tank will match the lip of the weir.
You have a decision, 1" is the best for safety reasons. You don't want your sump reserve to be able to overflow your tank.
But a 1" gap my be unsightly to you? I think it would bother me thinking my tank is low on water all the time. But if you can live with it, the 1" is safer!
FYI,
your sump materials look good!
With a coast to coast like this, overflow wouldn't be a problem imho. OP, if you do 1" and up-plum to 1.5" after the valves you'll be good. Coast to coast flows a lot of water and so long as you get a pump that can't overflow the bean setup which is typically 1500gph,or something around there, then you have nothing to worry about.
Last edited by rickztahone; 04-25-2017 at 03:29 PM.
Click here to view my 75g Acrylic Tank w/ Bean Animal Overflow with 40g Sump Thread
Also, click here for my 25 group of discus grow out thread
http://i3.cpcache.com/product/162117...ht=75&width=75
Want to look like Al did at his ACA talk with his white Simply Polo shirt?(You can catch Al's awesome Discus talk HERE)
You can get this and many more items such as T-shirts/Polos/hoodies/cups from our merchandise shop:
Cafepress.com
I wouldn't be going near 1500gph so I wouldn't be worried about overflowing. I was aiming for 600-700gph range, do you think this is to much? The reason I ask is my stocking plans changed. I am going to get about 15 3" discus and grow them out and then sell 3 when they are 5". This amount of flow shouldn't be a problem at that size?
Will a 1/2" weir be enough? I went 1" for safety but would prefer the water line as high as possible. Thinking about it now does the height of the weir really matter with that size of overfllow?
I believe I measured how "tall" the water goes over my weir which isn't a full coast to coast on my 75g and it was about 1/4" or maybe in less than that. With a weir like that one you are describing, it would be much larger surface area which means the water has even more place to spread out. I think you'd be fine with less than 1" but that is completely up to you. For reference, I am running an Eheim 1260 modded to 1262 on this tank. Absolutely no problems and my valve is still pretty throttled back. Unless you put a huge pump in your sump, which I wouldn't suggest anyways with discus, you should have no problems.
Click here to view my 75g Acrylic Tank w/ Bean Animal Overflow with 40g Sump Thread
Also, click here for my 25 group of discus grow out thread
http://i3.cpcache.com/product/162117...ht=75&width=75
Want to look like Al did at his ACA talk with his white Simply Polo shirt?(You can catch Al's awesome Discus talk HERE)
You can get this and many more items such as T-shirts/Polos/hoodies/cups from our merchandise shop:
Cafepress.com
Don't want to hijack the thread but this is all good info as I will be switching to a sump soon.
Ricardo I believe somewhere you had posted you were using large media bags that you could cut to size and tie off? I'm building a sump out of a 40B and can't find a bag close to fitting the almost 18" width of the tank. I suppose I could use a bunch or smaller bags but would be nice to have bags I could stack that would fit the entire width.
Dylan I am using many of the same materials in my sump. I also have 10,20,30 poret, ceramic media that is currently in my canister, will be using a purigen reactor and also an aqua uv sterilizer. I am going to go with the 25 or 40 watt though.
Last edited by Ryan925; 04-25-2017 at 07:01 PM.
Im not illiterate...only my phone's auto correct is
Yes it will basically be a cosmetic thing. A beautiful rimless tank with a water mark all the way around at 1" would drive me nuts! LOL..
Ryan,...again are we on the same page or what!!!....I'm building a 40breeder sump as well! LOL..
BUT mine has a couple twists in it! LOL..
I was going to get a 40watt but I can't justify spending that much on a uv sterilizer.
I decided to go 1/2" on the weir lip.
I found some time to design the layout of my sump and was looking for some feedback/advice on it. with sponge.jpg
Im not illiterate...only my phone's auto correct is