Do you know what size tubing or pipe the FX6 intake accepts?
Hi I was wondering if anyone has done some kind of diy for a pre filter on the fx6 intake I really like the filter but would be better if I could rig a sponge or something on the intake so not so much food and debris get sucked into the intake. anybody ever done anything to theres would love to hear some suggestions thanks
Do you know what size tubing or pipe the FX6 intake accepts?
Depending on the size, you could probably diy something with pvc or vinyl tubing if necessary.
The intake strainer is pretty big on the FX6, so you might be able to just wrap it with a nylon (polyester is too fine) filter sock. I used to do this on Aquaclears but wrapped some sponge around the thin AC strainer first to fill the space. A cable tie kept it on the intake tube.
Sorry this isn't exactly what you were asking but I thought I'd mention some things I do that helps make the water crystal clear. I tie a 4" filter sock around the out-take to clarify the water and I strap a sponge around my circulation pumps with a rubber band. It captures a lot of crud which I wash it out every day.
I stopped with sponge prefilters because it was a pain to keep rinsing them. A media bag with sufficient surface area can easily go a couple months without maintenance.
I know this thread is a little old, but I did find a pretty good solution with the fx4 which I believe is same size strainer on the intake. Get the sponge that is made for the aquaclear110, hollow out the center just deep enough to slide entire strainer into the sponge. I was then able to remove about another half of the sponge after that. Hope you found a solution already, but I was happy with how it turned out. Sponge just stays on there without string or anything as long as you don’t hollow it out too much. It should be snug around the intake strainer
Nice! Any tricks for hollowing out? What did use? Thanks
I buy the Top Fin replacement sponges at Petsmart. It comes two in a box. The sponge is already hollowed out so you can just slip it over the intake. Work s great. Comes in medium and large size. On the box it says refill for Top Fin MF20 multi-stage internal filter. Part # 5282616 for the medium size.