ClorAm-x

[Larry L]

Anyone using it and proper dosage for gallons removes ammonia and chlorine, chloramine.

[Skip]

what does the directions say??

[pitdogg2]

DIRECTIONS FOR USE
To remove and detoxify ammonia, chlorine and chloramines from water for aquariums or ponds, to condition new tap water or for chlorine and chloramine removal, add 1 teaspoonful (5 mL) of Liquid Buffered ClorAm-X per 10 gallons of water. To remove ammonia in existing aquariums or ponds add 1 teaspoonful of Liquid Buffered ClorAm-X to each 10 gallons of water for each measured 1.0 mg/L of total ammonia (=0.85 mg/L total ammonia-nitrogen). For protecting fishes and aquatic invertebrates during shipping add 1 teaspoonful of Liquid Buffered ClorAm-X to each 10 gallons of water for each expected 1.0 mg/L of total ammonia (=0.85 mg/L total ammonia-nitrogen). May be used at levels up to 10X the single dosage.


IIRC this is nothing more than "old" Amquel. When Kordan didn't renew/lost their contract to be the distributor of both Novaqua/Amquel I believe Hikari then brought the right to it. This why you now see Novaqua+ and Amquel+ completely different formula's.