PDA

View Full Version : Better than sponge filters?



NickK
01-24-2004, 01:02 AM
After squeazing my numerous sponge filters tonight, I was completely amazed how much filth these filters can attract within a couple of days. Cleaning all of these sponges is quite a task.

Two questions:

1 - What is the best way to get them very clean, without killing bio?

2 - Are there any alternative filters which would offer equal mechanical filtration, which are easier to clean?

Thanks,
Nick

Willie
01-24-2004, 09:20 AM
1. Squeeze the h*ll out of them. You can't squeeze all the bacteria out so go to town.

2. Sponge filters are the easiest to clean, because you throw all the gunk out. Most other mechanical filtration systems move the gunk out of sight and people forget to clean them.

JMO, Willie

SSTurner
01-24-2004, 09:46 AM
The best way to get them nice and clean is to let Kate clean them :o

mench
01-24-2004, 10:02 AM
Good answer Steve....
Nick what I do is have an extra set of sponges on hand...I change the old with the new...rinse the dirty ones then they go into a bucket of water and some bleach...soak for a few hrs the rinse again then air dry and ready and clean for the next time.....
Hows the red guys doing??? any more spawn???? Are you and Kate planning on coming to Denver????

Mench

Very Fishy
01-24-2004, 11:31 AM
The best alternative IMO are Aquaclear power filters with the 2 sponges. These provide excellent mechanical and biological filtering. When doing a water change, I remove the sponges and squeeze out in a bucket of used tank water and replace in filter. If you use bleach to clean them, you will kill all the bacteria.

Willie
01-24-2004, 12:44 PM
Ya gotta squeeze them sponges, one way or the other. Sponge filters are easiest to squeeze, most difficult to ignore.

Willie :D

NickK
01-24-2004, 01:33 PM
Hey Steve/Mench! How are you doing? I'm not sure if we will make it to Denver. When is it?

I cleaned a sponge filter in an old tank last night, so I could really see how clean I could get it. I squeezed FOREVER, and dusty filth kept on coming out. Since I have so many fry in these tanks, I am really trying to keep the tanks/filters spotless. I will keep searching for a better solution/method.

Mench - I have pairs everywhere, and have resorted to weekly sucking up massive batches of eggs (since I have no more room). I put together a small website, to advertise in the local paper. I have not released it yet, but some people have already found it.

Let me know what you think.

Nick & Kate
www.discusbydesign.com

Carol_Roberts
01-24-2004, 02:01 PM
I like it :thumbsup:
Simple, straight forward, loads fast, easy to navigate. Only thing missing are prices . . . maybe you should list something like . . . . Discus starting at $xx.xx each

gary1218
01-24-2004, 07:39 PM
Hey Nick, do me a favor and in a day or two take a nitrIte reading in the tank where you just squeezed the heck out the sponge to clean it and let us know what it is.

Maybe it's just me, but even with light cleaning of the sponges I tend to get a little bit of a nitrIte reading.

I just switched to the sponge filters that Jason sells. They seem a little finer sponge so we'll see how they work.

GARY

jules
01-24-2004, 08:28 PM
I squeezed my AQ filter in tank water like crazy the other day and did get a nitrite reading afterwards.

RyanH
01-25-2004, 11:54 AM
I squeezed my AQ filter in tank water like crazy the other day and did get a nitrite reading afterwards.


....and....????

:)

NickK
01-25-2004, 01:11 PM
Carol,
Good idea. Until I update the site, here are the prices for the Passions we are currently selling.

2-3" - $35
1-2" - $25

Nick & Kate

jules
01-25-2004, 04:19 PM
Ryan, just responding to Garys' post. :elvis:

RAWesolowski
01-25-2004, 07:15 PM
Nick,

I like your website! It's clean and straight forward. You've done a nice job with sample pix.

NickK
01-25-2004, 08:22 PM
Thanks, Ray! That was my goal.

Nick